As Christmas is coming at the end of this week I really needed to finish some EZboard ornaments today so I could get them delivered.
After carving I sprayed a couple of coats of Rustoleum 2X gloss cardinal red until it was covered. I sprayed this normally so the recessed areas were covered as well as the surface. Then for affect I sprayed a very light coat of Rustoleum 2X nutmeg at a very low angle to the surface so only a little would get in the recessed area and most of it would settle on the surface. I sprayed lightly so the nutmeg didn’t totally overwhelm the red color.
Here’s the result…